Journal Publications Published

  1. O’Niel, N., and Kabir, A. S., Pulsed Waterjet Roughening of Cast Iron and Aluminum Alloy for Automotive Engine Remanufacturing with Plasma Transferred Wire Arc Coating, Coatings (IF: 2.44), 10(9), 864, 2020.
  2. Rajan, S., Wanjara, P., Baradari, J., and Kabir, A. S., Joining of Dissimilar Alloys Ti-6Al-4V and Ti-6Al-2Sn-4Zr-2Mo-0.1Si using Linear Friction Welding, Materials (IF: 3.06), 13(17), 2020.
  3. Abdollahi, A., Huda, A. S. A., and Kabir, A. S., Microstructural Characterization and Mechanical Properties of Fiber Laser Welded CP-Ti and T-6Al-4V Similar and Dissimilar Joints, Metals (IF: 2.12), 10, 747, 2020.
  4. Sanjari, M., Farkoosh, A. R., Amirkhiz, B. S., He, Y., Javaid, A., Kabir, A. S., Su, J., Jung, I-H., and Yue, S., The Role of Zn/Nd Ratio in Microstructural Evolution in the Mg-Zn-Nd System during Static Recrystallization: Grain Boundary Partitioning of Solutes, Scripta Materialia (IF: 5.08), Vol. 134, 2017, pp. 1-5.
  5. Sanjari, M., Farkoosh, A. R., Kabir, A. S., Su, J., Jung, I-H., Yue, S., Amirkhiz, B. S., and He, Y., The Role of the Nd/Zn Ratio on the Stability of Mg-Zn-Nd Clusters and the Evolution of Texture in Two Mg-Zn-Nd Alloys during Annealing, Materials Science Forum (IF: 0.35), Vol. 879, 2017, pp. 542-547.
  6. Su, J., Kabir, A. S., and Yue, S., Effect of As-rolled Microstructure on Static Recrystallization Characteristics and Texture Evolution during Annealing, Materials Science Forum (IF: 0.35), Vol. 879, 2017, pp. 1896-1881.
  7. Su, J., Kabir, A. S., Sanjari, M., and Yue, S., Correlation of Static Recrystallization and Texture Weakening of AZ31 Magnesium Alloy Subjected to High Speed Rolling, Materials Science and Engineering: A (IF: 4.65), Vol. 674, 2016, pp. 343-360.
  8. Kabir, A. S., Su, J., and Yue, S., Texture Evaluation of a Bi-modal Structure during Static Recrystallization of Hot Deformed Mg-Al-Sn Alloy, Metallurgical and Materials Transaction: B (IF: 2.03), Vol. 47 (6) 2016, pp. 1-7.
  9. Su, J., Sanjari, M., Kabir, A. S., Jonas, J.J., and Yue, S., Static Recrystallization Behavior of Magnesium AZ31 Alloy Subjected to High Speed Rolling, Materials Science and Engineering: A (IF: 4.65), Vol. 662, 2016, pp. 412-425
  1. Kabir, A. S., Sanjari, M., Su, J., Jung, I-H., and Yue, S., Effect of Annealing on Microstructure and Texture Evolution of Uniaxial Hot Compressed Mg–Al–Sn Alloys, Journal of Materials Science (IF: 3.55), Vol. 53, 2016, pp. 1600-1609.
  2. Su, J., Sanjari, M., Kabir, A. S., Jung, I-H, and Yue, S., Dynamic Recrystallization Mechanisms during High Speed Rolling of Mg-3Al-1Zn Alloy Sheets, Scripta Materialia (IF: 5.08), Vol. 213, 2016, pp. 198-201.
  3. Kabir, A. S., Su, J., Sanjari, M., Jung, I-H, and Yue, S., Age-Hardening Response of Mg-Al-Sn Alloys, Materials Science Forum (IF: 0.35), Vol. 828-829, 2015, pp. 250-255.
  4. Su, J., Sanjari, M., Kabir, A. S., Jung, I-H, and Yue, S., Static Recrystallization Characteristic of Low Temperature Rolled AZ31 Magnesium Alloy during Annealing, Materials Science Forum (IF: 0.35), Vol. 828-829, 2015, pp. 239-243.
  5. Kabir, A. S., Sanjari, M., Su, J., Jung, I-H., and Yue, S., Influence of Static Precipitation on Microstructure and Texture of Annealed Cold Rolled Mg-Al-Sn Alloys, Metallurgical and Materials Transaction: B (IF: 2.03), Vol. 46(4), 2015, pp. 1674-1683
  6. Su, J., Sanjari, M., Kabir, A. S., Jung, I-H, Jonas, J.J., Yue, S. and Utsunomiya,, H., Characteristics of Magnesium AZ31 Alloys Subjected to High Speed Rolling, Materials Science and Engineering: A (IF: 4.65), Vol. 636 (11), 2015, pp. 582–592.
  7. Kabir, A. S., Sanjari, M., Su, J., Jung, I-H., and Yue, S., Effect of Strain-induced Precipitation on Dynamic Recrystallization in Mg-Al-Sn Alloys, Materials Science and Engineering: A (IF: 4.65), Vol. 616, 2014, pp. 252-259.
  8. Kabir, A. S., Su, J. Sanjari, M., Jung, I-H., and Yue, S., Effect of Precipitation on Texture Evolution during Dynamic Recrystallization in Mg-Al-Sn Alloys, Advanced Materials Research (IF: 0.39), Vol. 922, 2014, pp. 304-309.
  9. Kabir, A. S., Su, J. Sanjari, M., Jung, I-H., and Yue, S., Thermodynamic Modeling and Experimental Measurement of Precipitation Formation during Dynamic Recrystallization for Magnesium Alloys, Advanced Materials Research (IF: 0.39), Vol. 922, 2014, pp. 310-315.
  10. Sanjari, M., Farzadfar, A., Kabir, A. S., Utsunomiya, H., Petrov, R., Kestens, L., Yue, S., Promotion of Texture Weakening in Magnesium by Alloying and Thermomechanical Processing: (I) Alloying, Journal of Materials Science (IF: 3.55), Vol. 49 (3), 2014, pp. 1408-1425.
  11. Sanjari, M., Kabir, A. S., Farzadfar, A., Utsunomiya, H., Petrov, R., Kestens, L., Yue, S., Promotion of Texture Weakening in Magnesium by Alloying and Thermomechanical Processing: (II) Rolling Speed, Journal of Materials Science (IF: 3.55), Vol. 49 (3), 2014, pp. 1426-1436.
  12. Su, J., Kaboli, S., Kabir, A. S., Jung, I-H, and Yue, S., Effect of Dynamic Precipitation and Twinning on Dynamic Recrystallization of Micro-alloyed Mg-Al-Ca Alloys, Materials Science and Engineering: A (IF: 4.65), Vol. 587, 2013, pp. 27-35.
  13. Kabir, A. S., Su, J., Jung, I-H, and Yue, S., Study of Dynamic Precipitation During Hot Deformation of Mg-Al-Sn Alloys, Materials Science Forum (IF: 0.35), Vol. 765, 2013, pp. 461-465.
  14. Cao, X., Kabir, A. S., Baradari, J.G., Wanjara, P., Cuddy, J., Birur, A., and Medraj, M., Global and Local Mechanical Properties of Autogenously Laser Welded Ti-6Al-4V, Metallurgical and Materials Transactions A (IF: 2.05), Vol. 45 (3), 2013, pp. 1258-1272.
  1. Kabir, A. S., Cao, X., Baradari, J.G., Wanjara, P., Cuddy, J. Birur, A., and Medraj, M., Effect of Post-weld Heat Treatment on Microstructure, Hardness, and Tensile Properties of Laser Welded Ti- 6Al-4V, Metallurgical and Materials Transactions A (IF: 2.05), Vol. 43 (11), 2012, pp. 4171-4184.
  2. Kabir, A. S., Cao, X., Wanjara, P., Cuddy, J., Birur, A., and Medraj, M., Use of Filler Wire for Laser Welding of Ti-6Al-4V, Canadian Metallurgical Quarterly (IF: 0.86), Vol. 51 (3), 2012, pp. 320-327.
  3. Kabir, A. S., Cao, X., Baradari, J.G., Wanjara, P., Cuddy, J. Birur, A., and Medraj, M., Determination of Global and Local Tensile Behaviours of Laser Welded Ti-6Al-4V Alloy, Advanced Materials Research (IF: 0.39), Vol. 400, 2012, pp. 857-862.

Conference Proceedings (Peer Reviewed)

  1. Rajan, S., Wanjara, P., Gholipour, J., and Kabir, A. S., Effect of Stress Relief Annealing on the Microstructure and Mechanical Properties of Linear Friction Welded Ti-6Al-4V, Conference of Metallurgist (COM), Toronto, ON, 2020.
  2. Walker, P., Kabir, A. S., and ElSayed, M. E., Impact of Extended Heat Treatments on Additively Manufactured Ti-6Al-4V, Conference of Metallurgist (COM), Toronto, ON, 2020.
  3. Abdollahi, A., Huda, A. S. A., and Kabir, A. S., Microstructures and Mechanical Properties of Fiber Laser Welded Ti-6Al-4V and CP-Ti Dissimilar Joints, Conference of Metallurgist (COM), Toronto, ON, 2020.
  4. Clement, D., Kabir, A. S., On the heat treatment of AlSi10Mg fabricated by Selective Laser Melting Process, TMS Annual Meeting and Exhibition, San Diego, CA, 2019.
  5. Sahoo, R., Kabir, A. S., Effects of Heat Treatments on Microstructures and Mechanical Properties of Ti-5553 Alloy, TMS Annual Meeting and Exhibition, San Diego, CA, 2019.
  6. Li, S., Kabir, A. S., Effect of Heat Treatment on Microstructure and Mechanical Properties of a Near- Beta Titanium Alloy, Materials Science and Technology Conference, Portland, OR, 2019.
  7. Walker P., Kabir A. S., ElSayed M., Modelling Ti-6Al-4V Lattice Materials with Anisotropic Microstructure Produced by Additive Manufacturing, International Conference on Mechanical and Aerospace Engineering, Ottawa, ON, 2018.
  8. Kabir, A. S., Su, J., Sanjari, M., Jung, I-H, and Yue, S., Non-basal texture evolution during annealing of cold-deformed magnesium alloy, Magnesium Technology 2016, TMS Annual Meeting and Exhibition, Nashville, TN, 2016.
  9. Su, J, Kabir, A. S., Jung, I-H, and Yue, S., Effect of Dynamic Recrystallization on Static Recrystallization and Texture Weakening during Annealing on High Speed Rolled AZ31 Magnesium Alloy Sheets, Magnesium Technology 2016, TMS Annual Meeting and Exhibition, Nashville, TN, 2016.
  10. Su, J., Sanjari, M., Kabir, A. S., Jung, I-H., and Yue, S., Improvement of low temperature formability of AZ31 magnesium alloy by high speed rolling, Engineering Solutions for Sustainability: Materials & Resources II at the TMS Annual Meeting and Exhibition, Orlando, FL, 2015.
  11. Su, J., Sanjari, M., Kabir, A. S., Jung, I-H., and Yue, S.,Improvement of ductility of magnesium AZ31 alloy sheets by high speed rolling and subsequent annealing, Materials Science & Technology (MS&T), Cleveland, OH, 2015.
  1. Kabir, A. S., Sanjari, M., Su, J., Jung, I-H., and Yue, S., Progressive Texture Evolution during Annealing of Hot Rolled Mg-Al-Sn Alloy, Conference of metallurgist (COM), Toronto, ON, 2015.
  2. Su, J., Sanjari, M., Kabir, A. S., Jung, I-H., and Yue, S., Recrystallization of AZ31 magnesium alloy during high speed rolling and subsequent annealing, Conference of metallurgist (COM), Toronto, ON, 2015.
  3. Sanjari, M., Kabir, A. S., Su, J., Tamimi, S.K., Petrov, R., Yue, S., and Kestens, L., Formability Correlation between Texture Weakening and Deformations Mechanism in a Rolled AZ31 Magnesium Alloy, Conference of metallurgist (COM), Toronto, ON, 2015.
  4. Kabir, A. S., Sanjari, M., Su, J., Jung, I-H., and Yue, S., Texture Weakening of Mg-Al-Sn alloys during Dynamic recrystallization with the presence of Strain induced Precipitates, Magnesium Alloys and Their Applications, Jeju, South Korea, 2015.
  5. Su, J, Sanjari, M., Kabir, A. S., Jung, I-H, and Yue, S., Effect of rolling speed on the deformation behaviour of low temperature rolled AZ31 magnesium alloy sheets, Magnesium Alloys and Their Applications, Jeju, South Korea, 2015.
  6. Su, J., Kabir, A. S., Sanjari, M., Jung, I-H., and Yue, S., Grain Growth and Texture Evolution during Annealing of a High Speed Rolled AZ31 Magnesium Alloy, Magnesium Alloys and Their Applications, Jeju, South Korea, 2015.
  7. Sanjari, M., Tamimi, S.K., Su, J., Kabir, A. S., Hara, K., Utsunomiya, H., Petrov, R., Yue, S., and Kestens, L., Study of deformation texture in an AZ31 magnesium alloy rolled at wide range of rolling speed and reduction, 17th International Conference on Texture of Materials (ICOTOM-17), Dresden, Germany, 2015.
  8. Kabir, A. S., Sanjari, M., Su, J., Jung, I-H., and Yue, S., (Invited) Effect of Static Precipitation on Microstructure and Texture of Warm Rolled Mg-Al-Sn Alloy, Conference of metallurgist (COM), Vancouver, BC, 2014.
  9. Sanjari, M., Kabir, A. S., Su, J., Jung, I-H., Hara, K., Kestens, L., and Yue, S., Formability Improvement for AZ31 Magnesium Alloy Rolled at Wide Range of Rolling Speed and Reductions, Conference of metallurgist (COM), Vancouver, BC, 2014.
  10. Su, J., Sanjari, M., Kabir, A. S., Jung, I-H., Utsunomiya, H. Kestens, L., and Yue, S., Static Recrystallization and Texture Evolution of Fast Rolled AZ31 during Annealing, Conference of metallurgist (COM), Vancouver, BC, 2014.
  11. Kabir, A. S., Su, J., Sanjari, M., Jung, I-H, and Yue, S., Post deformation annealing behavior of Mg-Al-Sn alloys, Magnesium Technology 2014, TMS Annual Meeting and Exhibition, San Diego, CA, 2014.
  12. Su, J, Kabir, A. S., Jung, I-H, and Yue, S., Deformation behavior and dynamic recrystallization of micro-alloyed Mg-Al-Ca alloys during high temperature deformation, Magnesium Technology 2014, TMS Annual Meeting and Exhibition, San Diego, CA, 2014.
  13. Kabir, A. S., Su, J. Sanjari, M., Jung, I-H., and Yue, S., Microstructure Development and Texture Study of Mg-Al-Sn Alloys by Strain Induced Precipitation, Materials Science & Technology (MS&T), Montreal, QC, 2013.
  1. Sanjari, M., Kabir, A. S., Pirgazi, H., Utsunomiya, H., Jung, I-H., Petrov, R., Kestens, L., and Yue, S., Promotion of Texture Weakening in Magnesium by Alloying and Thermomechanical Processing, Materials Science & Technology (MS&T), Montreal, QC, 2013.
  2. Su, J., Kaboli, S., Kabir, A. S., Jung, I-H., and Yue, S., Dynamic recrystallization and texture of micro-alloyed magnesium-aluminum-calcium alloys during hot deformation, Materials Science & Technology (MS&T), Montreal, QC, 2013.
  3. Kabir, A. S., Su, J., Jung, I-H, and Yue, S., Effect of Precipitation on Dynamic Recrystallization Grain Size in a Magnesium Alloy, Magnesium Technology 2013, TMS Annual Meeting and Exhibition, San Antonio, TX, 2013.
  4. Kabir, A. S., Su, J., Vo, P., Jung, I-H., and Yue, S., Uniaxial Hot Deformation of Mg-Al-Sn Alloy, Magnesium Alloys and Their Applications, Vancouver, BC, 2012.
  5. Su, J., Vo, P., Kabir, A. S., Jung, I-H., Verma, R., Gammage, J., and Yue, S., Effect of precipitates on dynamic recrystallization during hot compression of micro-alloyed Mg-Al-Ca alloys, Magnesium Alloys and Their Applications, Vancouver, BC, 2012.
  6. Kabir, A. S., Su, J., Vo, P., Jung, I-H, and Yue, S., Precipitation Formation and Grain Refinement of Mg-Al-Sn Alloy during Hot Deformation, Magnesium Technology 2012, TMS Annual Meeting and Exhibition, Orlando, FL, 2012.
  7. Su, J., Kaboli, S., Kabir, A. S., Vo, P., Jung, I-H, and Yue, S., Precipitation behavior of micro- alloyed Mg-Al-Ca alloys during heat treatment and hot compression, Magnesium Technology 2012, TMS Annual Meeting and Exhibition, Orlando, FL, 2012.
  8. Kabir, A. S., Cao, X., Wanjara, P., Cuddy, J. Birur, A., and Medraj, M., Use of Filler Wire for Laser Welding of Ti-6Al-4V, Conference of Metallurgist (COM), Innovation in Joining of Advanced Materials, Montreal, QC, 2011.
  9. Kabir, A. S., Cao, X., Medraj, M., Wanjara, P., Cuddy, J. and Birur, A., Effect of Welding Speed and Defocusing Distance on Laser Welded Ti-6Al-4V Alloy Quality, Proceedings of the Materials Science and Technology (MS&T), Houston, TX, 2010.

Conference Presentations (Abstract Only)

  1. Kabir, A. S., (Keynote) A New Titanium Alloy for Aerospace Applications, International Meeting in Materials Science and Engineering of Maranhao, Sao Luis, Brazil, 2021.
  2. Huda, A. S. A., and Kabir, A. S., Study of Precipitation Kinetics Behavior of Ti-5Al-5V-5Mo-3Cr (Ti-5553), International Materials Research Congress, Cancun, Mexico, 2020.
  3. O’Niel, N., and Kabir, A. S., Optimized Surface Roughening by Pulsed Waterjet for Suitable Adhesion Strength of Plasma Transfer Wire Arc Coating, Conference of Metallurgist (COM), Toronto, ON, 2020.
  4. Huda, A. S. A., and Kabir, A. S., Optimization of Heat Treatment Parameters to Study the Precipitation Behavior of Ti-5Al-5V-5Mo-3Cr (Ti-5553), Conference of Metallurgist (COM), Toronto, ON, 2020.
  5. Huda, A. S. A., and Kabir, A. S., Precipitation Kinetics of Titanium Alloy Ti-5Al-5V-5Mo-3Cr (Ti- 5553), Ontario Aerospace Council Meeting, Toronto, ON, 2020.
  1. Sidharth, R., Wanjara, P., Gholipour, J., and Kabir, A. S., Effect of Post-weld Heat treatments on the Microstructure and Mechanical Properties of Linear Friction Welded Ti-6Al-4V, Material Science and Technology Conference (MS&T), Portland, OR, 2019.
  2. Abdollahi, A., Huda, A. S. A., and Kabir, A. S., Fiber Laser Welding of Commercially Pure Titanium to Ti-6Al-4V Alloy, Material Science and Technology (MS&T), Portland, OR, 2019.
  3. Kabir, A. S., Walker, P., and El-Sayed, M., Effect of Build Direction on the Microstructure and Mechanical Properties of Selective Laser Melted Ti-6Al-4V Alloy, CASI-AERO, Laval, QC, 2019.
  4. Clement, C., and Kabir, A. S., On the effects of nanoparticle reinforcement during additive manufacturing of AlSi10Mg, CASI-AERO, Montreal, QC, 2019.
  5. Clement, C., and Kabir, A. S., Metallurgical Studies on Additively Manufactured AlSi10Mg: Effects of Heat Treatment and Nano-Particle Reinforcement, Ontario Aerospace Council Meeting, Toronto, ON, 2019.
  6. Kabir, A. S., Sanjari, M., Su, J. Jung, I-H., and Yue, S., (Winner of the Best Graduate Poster Award), Dynamic Precipitation and Recrystallization: Effects on Grain Size and Texture, TMS annual meeting, San Diego, CA, 2014.
  7. Kabir, A. S., Su, J., Jung, I-H, and Yue, S., Effect of Precipitation on Texture Evaluation of Hot Deformed Mg-Al-Sn Alloy, 5th International Conference on Recrystallization and Grain Growth, Sydney, Australia, 2013.
  8. Kabir, A. S., Su, J., Jung, I-H, and Yue, S., Effect of Mg2Sn Precipitate on Microstructure and Texture Evolution of Hot Deformed Mg-Al-Sn Alloy, Magnesium Workshop Madrid 2013, An International Workshop on Processing-Microstructure-mechanical Property of Magnesium Alloys, May 21-24, Madrid, Spain, 2013.
  9. Kabir, A. S., Su, J. Sanjari, M., Jung, I-H., and Yue, S., Microstructure refinement of magnesium alloys by precipitation pinning at the dynamic recrystallized grin boundary, (Winner of the Best Oral Presentation), 25th Canadian Materials Science Conference, Montreal, QC, 2013.
  10. Su, J., Kabir, A. S., Jung, I-H, and Yue, S., Dynamic Precipitation during hot compression in two micro-alloyed Mg-Al-Ca alloys, Magnesium Technology, TMS Annual Meeting and Exhibition, San Antonio, TX, 2013.
  11. Su, J., Kaboli, S., Kabir, A. S., Jung, I-H, and Yue, S., Precipitation Hardening Response of Micro- alloyed Mg-Al-Ca Alloys During Aging and the Effect of Deformation on Precipitation, 25th Canadian Materials Science Conference, Montreal, QC, 2013.
  12. Su, J., Kabir, A. S., Jung, I.-H., Yue, S.,Dynamic Recrystallization Grain Size with Zener- Hollomon Parameter of Micro-alloyed Mg-Al-Ca Alloys, Euro Light Metal, Bremen, Germany, 2013.
  13. Kabir, A. S., Su, J., Jung, I-H, and Yue, S., Effect of Precipitation on Dynamic Recrystallized Grain Size in Mg-Al-Sn Alloys, American Society of Materials (ASM) student night, Montreal, QC, 2013.
  14. Su, J., Kabir, A. S., Jung, I-H, and Yue, S., Dynamic Precipitation and Recrystallization during Hot Compressionin Micro-alloyed Mg-Al-CaAlloys, American Society of Materials (ASM) student night, Montreal, QC, 2013.
  15. Kabir, A. S., Su, J., Jung, I-H, and Yue, S., (Winner of the Best Graduate Poster Award), Dynamically Recrystallized Grain Size Reduction of Mg-Al-Sn Alloy during Hot Deformation, American Society of Materials (ASM) student night, Montreal, QC, 2012.
  16. Su, J., Kabir, A. S., Jung, I-H, and Yue, S., Strain Induced Precipitation During Hot Deformation of Micro-alloyed Mg-Al-Ca Alloys, American Society of Materials (ASM) student night, Montreal, QC, 2012.

Share: Twitter, Facebook
Short URL: https://carleton.ca/aml/?p=142