| 2023 | |
| [70] | Autumn R. Bernard, Muhammet Muaz Yalcin, and Mostafa S.A. ElSayed; “Development of Numerical Model for the Crashworthiness of Additively Manufactured Sandwich Lattices”; AIAA SCITECH 2023 Forum. 2023. (Accepted) |
| 2022 | |
| [69] | Gasparetto, V.E.L., Parsons, W., ElSayed, M.S.A. Saad, M., Shield, S., Brown, G.I., and Hilliard, L.M. “Pointing Accuracy Attenuation of VLBI Earth-Based Antennas Subject to Aerodynamic Gust Employing Passive Tuned Mass Dampers.” Journal of the Brazilian Society of Mechanical Sciences and Engineering, BMSE-D-21-02387. (Under Review) |
| [68] | Gasparetto, V.E.L., Parsons, W., ElSayed, M.S.A. Saad, M., Shield, S., Brown, G.I., and Hilliard, L.M. “Multi-objective Design Optimization of Multiple Tuned Mass Dampers for Attenuation of Dynamic Aeroelastic Response of Aerospace Structures.” Journal of Aerospace, MDPI, aerospace-2040666. (Under Review) |
| [67] | Parisien, A., ElSayed, M. S., & Frei, H. (2022). Mechanoregulation modelling of stretching versus bending dominated periodic cellular solids. Materials Today Communications, 33, 104315. |
| [66] | Parsons, W. P., Gasparetto, V. E., ElSayed, M. S., Saad, M., Shield, S., Brown, G. L., & Hilliard, L. M. (2022). Dynamic aeroelastic performance optimization of adaptive aerospace structures using structural geometric nonlinearities. Journal of Aerospace Engineering, 35(6), 04022089. |
| [65] | Sudasinghe, A., Rajakareyar, P., Matida, E., Abo El Ella, H., & ElSayed, M. S. (2022). Aerodynamic Shape Optimization of an Aircraft Propulsor Air Intake with Boundary Layer Ingestion. Applied Mechanics, 3(3), 1123-1144. |
| [64] | Parisien, A., ElSayed, M. S., & Frei, H. (2022). Mature bone mechanoregulation modelling for the characterization of the osseointegration performance of periodic cellular solids. Materialia, 25, 101552. |
| [63] | Parsons, W. P., Gasparetto, V. E., ElSayed, M. S., Saad, M., Shield, S., Brown, G. L., & Hilliard, L. M. (2022). Multi-objective Design Optimization of Structural Geometric Nonlinearities for Response Attenuation of VLBI Antennae Subject to Aerodynamic Turbulence. Journal of Vibration Engineering & Technologies, 1-18. |
| [62] | T. Koukoulas, L. Wu and R. Green, K. Munro, A. Bouchard W.H. Cho, R. St-Gelais, T. Hodges, M. Stephan, S. Nelanuthala, M.S.A. ElSayed, “Measurement Considerations and Challenges on Infrasound Sensing Using a Combined Acoustic Wave and Optical Approach”, 28th International Congress on Sound and Vibration (ICSV28) |
| [61] | Parisien, A., Wai, E. K., ElSayed, M. S., & Frei, H. (2022). Subsidence of spinal fusion cages: a systematic review. International Journal of Spine Surgery. |
| [60] | Trudel, Eric, and Mostafa SA ElSayed. “Penalization techniques for fatigue‐based topology optimizations of structures with embedded functionally graded lattice materials.” International Journal for Numerical Methods in Engineering 123.9 (2022): 1991-2011. |
| [59] | Bernard, Autumn R., and Mostafa S. ElSayed. “Impact Resistance and Specific Energy Absorption Efficiency Limits of Periodic Cellular Solids.” AIAA SCITECH 2022 Forum. 2022. |
| [58] | Reid, Jackson G., and Mostafa S. ElSayed. “Multiscale Design Optimization with Integrating Overhang Constraints for Additively Manufactured Lattice Structures.” AIAA SCITECH 2022 Forum. 2022. |
| 2021 | |
| [57] | Al-Sukhon, Ayman, and Mostafa SA ElSayed. “Design optimization of hopper cars employing functionally graded honeycomb sandwich panels.” Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit 236.8 (2022): 920-935. |
| [56] | Gasparetto, V.E.L.; ElSayed, M.S.A. Multiscale Modelling and Mechanical Anisotropy of Periodic Cellular Solids with Rigid-Jointed Truss-Like Microscopic Architecture. Appl. Mech. (2021), 2, 331-355. https://doi.org/10.3390/applmech2020020 |
| [55] | Trudel, E., ElSayed, M.S.A. Global multiscale design optimization of procedural lattice structures for fatigue enhancement. Multiscale and Multidiscip. Model. Exp. and Des. (2021). https://doi.org/10.1007/s41939-021-00095-5 |
| [54] | Trudel, Eric, Peter Walker, Shaza Nosir, and Mostafa SA ElSayed. “Experimental Optimization for Fatigue Life Maximization of Additively Manufactured Ti-6Al-4V Alloy Employing Ultrasonic Impact Treatment.” Journal of Materials Engineering and Performance 30, no. 4 (2021): 2806-2821. |
| [53] | Trudel, Eric, and Mostafa SA ElSayed. “Conformal Wireframe Nets for Trimmed Symmetric Unit Cells in Functionally Graded Lattice Materials.” MDPI – Applied Mechanics 2.1 (2021): 81-107. |
| [52] | Gasparetto, Victor EL, and Mostafa SA ElSayed. “Shape transformers for phononic band gaps tuning in two-dimensional bloch-periodic lattice structures.” European Journal of Mechanics-A/Solids (2021): 104278. |
| [51] | Gasparetto, Victor EL, and Mostafa SA ElSayed. “Multiscale optimization of specific elastic properties and microscopic frequency band-gaps of architectured microtruss lattice materials.” International Journal of Mechanical Sciences 197 (2021): 106320. |
| [50] | William Parsons, Mostafa SA ElSayed, Mohamed Saad, Stephen Shield. “Geometric Nonlinearities for Tuning and Control of the Dynamic Response of Flexible Structures”, In AIAA Scitech 2021 Forum, Jan. 2021. |
| [49] | Victor EL Gasparetto, Mostafa SA ElSayed, Mohamed Saad, Stephen Shield. “Shape transformers for band gaps customization of Bloch-periodic triangular lattice structures”, In AIAA Scitech 2021 Forum, Jan. 2021. |
| 2020 | |
| [48] | Al-Sukhon, Ayman, and Mostafa SA ElSayed. “Fluid-Structure Interaction for the Multidisciplinary Design Optimization of Hopper Cars Employing Honeycomb Sandwich Composites.” In AIAA Scitech 2020 Forum, p. 1633. 2020. |
| [47] | Reid, Mac, Chase Sun, and Mostafa SA ElSayed. “Topology Optimization of Heat Sinks for High Efficiency Electronics Employing Simplified Convection Model.” In AIAA Scitech 2020 Forum, p. 2263. 2020. |
| 2019 | |
| [46] | Walker, Peter, Sinah Malz, Eric Trudel, Shaza Nosir, Mostafa SA ElSayed, and Leo Kok. “Effects of ultrasonic impact treatment on the stress-controlled fatigue performance of additively manufactured DMLS Ti-6Al-4V alloy.” Applied Sciences 9, no. 22 (2019): 4787. |
| [45] | Nieto, Michelle Guzman, Paul V. Thomas, Mostafa SA ElSayed, Mohamed Saad, Gary L. Brown, and Lawrence M. Hilliard. “Development of Efficient Dynamic Aeroelasticity Model for High Fidelity Pointing Accuracy Assessment of VLBI Earth-Based Radio Antennas.” International Journal of Aeronautical and Space Sciences (2019): 1-14. |
| [44] | Shahrazad Taher, Fred F. Afagh and Mostafa S.A. ElSayed., “Design and Characterization of Microstructured Tensegrity Lattice Materials as a New Candidate for Skin Panels of Morphing Aircraft Wings.”, Aero2019 Canadian Aeronautics and Space Institute Conference May 14-16, 2019, Laval, QC. |
| [43] | Peter Walker, Abu Syed Kabir and Mostafa S.A. ElSayed., “EFFECT OF BUILD DIRECTION ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF SELECTIVE LASER MELTED TI-6AL-4V ALLOY.”, Aero2019 Canadian Aeronautics and Space Institute Conference May 14-16, 2019, Laval, QC. |
| [42] | Ayman Al-Sukhon and Mostafa S.A. ElSayed., “MULTISCALE DESIGN OPTIMIZATION OF ECO-EFFICIENT FREIGHT RAILCARS EMPLOYING LIGHTWEIGHT HONEYCOMB SANDWICH PANELS.”, Aero2019 Canadian Aeronautics and Space Institute Conference May 14-16, 2019, Laval, QC. |
| [41] | M. A. A. Salman, Mostafa S.A. ElSayed and Denis Walch., “Nonlinear Dynamic Aeroelasticity Response Analyses of Very Flexible Aircraft at Conceptual Design Stage: a Sensitivity Study.” Aero2019 Canadian Aeronautics and Space Institute Conference May 14-16, 2019, Laval, QC. |
| [40] | Michelle Guzman Nieto, Paul V. Thomas, Mostafa S.A. ElSayed, Mohamed Saad, Gary L. Brown and Lawrence M. Hilliard. “Dynamic Aeroelasticity Response Analysis and Pointing Accuracy Assessment of VLBI High Precision Ground Antennas Subject to Aerodynamic Gust.”, Aero2019 Canadian Aeronautics and Space Institute Conference May 14-16, 2019, Laval, QC. |
| [39] | Ze Feng Gan, Justin Bisson, Jiajun Feng, Fidel Khouli*, Mostafa S.A. ElSayed, Fred Nitzsche. “Development and Optimization of Flight Dynamics, Control Laws and Avionics System for a UAV with a Multi-scale Optimized Blended Wing Body Configuration.” Aero2019 Canadian Aeronautics and Space Institute Conference May 14-16, 2019, Laval, QC. |
| [38] | Jason Millar, Udit Sapre, Ryan Miller, Kieran Lee, Samantha Mosca, Mostafa S.A. ElSayed, Fidel Khouli, and Fred Nitzsche. ”Integrated Dynamic Aeroelasticity Response Analyses and Multiscale Design Optimization of Unmanned Aerial Vehicle with Blended Wing Body Configuration.” Aero2019 Canadian Aeronautics and Space Institute Conference May 14-16, 2019, Laval, QC. |
| [37] | Thomas, Paul Vazhayil, Mostafa SA ElSayed, and Denis Walch. “Development of high fidelity reduced order hybrid stick model for aircraft dynamic aeroelasticity analysis.” Journal of Aerospace Science and Technology (2019). doi.org/10.1016/j.ast.2019.02.030 |
| [36] | MG Nieto, MSA ElSayed, D Walch, Efficient Global Optimization and Modal Strain Energy Coefficient Based-Algorithm for Fast Prediction of Dynamic Aeroelastic Loads, Journal of Structural and Multidisciplinary Optimization. Journal of Structural and Multidisciplinary Optimization. doi.org/10.1007/s00158-019-02239-1 |
| [35] | Trudel, Eric P., Mostafa S.A. ElSayed, Leo Kok, and Emmanuel Provost. “Multiscale Design Optimization of Additively Manufactured Aerospace Structures Employing Functionally Graded Lattice Materials.” In AIAA Scitech 2019 Forum, p. 0420. 2019. |
| [34] | Dinovitzer, Malcolm, Calvin Miller, Adam Hacker, Gabriel Wong, Zach Annen, Padmassun Rajakareyar, Jordan Mulvihill, and Mostafa S.A. ElSayed. “Structural Development and Multiscale Design Optimization of Additively Manufactured UAV with Blended Wing Body Configuration Employing Lattice Materials.” In AIAA Scitech 2019 Forum, p. 2048. 2019.Forum. 2019. |
| [33] | Malz, Sinah, Shaza Nosir, Eric P. Trudel, Mostafa S.A. ElSayed, Leo Kok, and Emmanuel Provost. “Effect of Ultrasonic Impact Treatment on the Stress-Controlled Fatigue Performance of Additively Manufactured Ti-6Al-4V Alloy.” In AIAA Scitech 2019 Forum, p. 0414. 2019. |
| 2018 | |
| [32] | Thomas, Paul Vazhayil, Mostafa SA ElSayed, and Denis Walch. “Review of Model Order Reduction Methods and Their Applications in Aeroelasticity Loads Analysis for Design Optimization of Complex Airframes.” Journal of Aerospace Engineering 32, no. 2 (2018): 04018156. |
| [31] | Salman, Muhammadh Ali A., Mostafa SA ElSayed, and Denis Walch. “Structural Nonlinearities and their Impact on the Fidelity of Critical Steady Maneuver Loads and Trimming Con figuration of Very Flexible Airframes.” Journal of Aeroelasticity and Structural Dynamics 6, no. 1 (2018). |
| [30] | Paul V. Thomas, Mostafa S. A. ElSayed and Denis Walch. “Model Order Reduction of Complex Airframes Using Component Mode Synthesis for Dynamic Aeroelasticity Load Analysis”, Journal of Mechanics and Automation 8.4, (2018). |
| [29] | MG Nieto, MSA ElSayed, D Walch, Improved Modal Contribution Factors as Response Tracking Mechanisms for Dynamic Systems During Design Optimization, CSME International Congress 2018, May 27-30, 2018, Toronto, On, Canada, (2018) |
| [28] | MG Nieto, MSA ElSayed, D Walch, Modal Participation Factors and their Potential Applications in Aerospace: a Review, CSME International Congress 2018, May 27-30, 2018, Toronto, On, Canada, (2018) |
| [27] | TV Nong, MSA ElSayed, T Letellier, Low-Velocity Impact Response and Experimental Optimization of Modified Fiber Metal Laminates with Integrated Mechanical Interlock Bonding System, CSME International Congress 2018, May 27-30, 2018, Toronto, On, Canada, (2018) |
| [26] | Nong, Tran‐Vu, Mostafa SA ElSayed, and Camille Biseul. “Experimental optimization and static characterization of modified fiber metal laminates with integrated mechanical interlock bonding system for aerospace applications.” Journal of Polymer Composites. doi.org/10.1002/pc.24891 |
| [25] | S Mareishi, MSA ElSayed, FF Afagh, Design Optimization of Dental Implant Using Additively Manufactured Lattice Materials, CMBBE 2018 – 15th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering (2018). |
| 2017 | |
| [24] | Miller, M., Nguyen, V., Lee Slew, K., Greiss, R., Li, L., Huang, X., ElSayed, MSA, Matida, E. “A Preliminary investigation of fiber-metal-laminates with grip metal”, cancom2017 – Canadian international conference on composite materials, July 17-20, (2017). |
| 2016 | |
| [23] | Mostafa S.A. ElSayed and Damiano Pasini, “Mechanics of 2D Pin Jointed Lattice Structures”, AES-ATEMA International Conference Series – Advances and Trends in Engineering Materials and their Applications, pp. 73-80, 10-14 October (2016). |
| 2013 | |
| [22] | ElSayed, Mostafa SA, Miguel Alejandro Gutierrez Contreras, and Nicholas Stathopoulos. “Monitor Points Method for Loads Recovery in Static/Dynamic Aeroelasticity Analysis with Hybrid Airframe Representation.” SAE International Journal of Aerospace 6.2013-01-2142 (2013): 399-407. |
| 2012 | |
| [21] | Elsayed, Mostafa SA, and Damiano Pasini. “Comprehensive stiffness of prestressed lattice materials.” Journal of Materials Science Research 1.2 (2012): 87. |
| 2011 | |
| [20] | D. Bacheva, MSA El Sayed, R.S.Trask, “The Skeleton of Euplectella Aspergillum as Foundation for the Development of Novel Composite Aerospace Structures”, 18th International Conference on composite materials, 21-26, Jeju, Korea, August 2011 |
| 2010 | |
| [19] | Elsayed, Mostafa SA. Multiscale mechanics and structural design of periodic cellular materials. Diss. McGill University Library, 2010. |
| [18] | Elsayed, Mostafa SA, and Damiano Pasini. “Analysis of the elastostatic specific stiffness of 2D stretching-dominated lattice materials.” Mechanics of Materials 42.7 (2010): 709-725. |
| [17] | Elsayed, Mostafa SA, and Damiano Pasini. “Multiscale structural design of columns made of regular octet-truss lattice material.” International Journal of Solids and Structures 47.14-15 (2010): 1764-1774. |
| [16] | Chintapalli, Sridhar, et al. “The development of a preliminary structural design optimization method of an aircraft wing-box skin-stringer panels.” Aerospace Science and Technology14.3 (2010): 188-198. |
| [15] | Elsayed, Mostafa SA, and Damiano Pasini. “Theoretical and experimental characterization of the 34.6 2D lattice material.” ASME 2010 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2010. |
| 2009 | |
| [14] | A. Elsayed, Mostafa S., Ramin Sedaghati, and Mohammed Abdo. “Accurate stick model development for static analysis of complex aircraft wing-box structures.” AIAA journal 47.9 (2009): 2063-2075. |
| [13] | Elsayed, Mostafa SA, and Damiano Pasini. “The Bloch’s Theorem.” (2009). |
| [12] | Elsayed, Mostafa SA, and Damiano Pasini. “Characterization and performance optimization of 2D lattice materials with hexagonal Bravais lattice symmetry.” ASME 2009 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2009. |
| [11] | Elsayed, Mostafa SA, and Damiano Pasini. “Mechanics of 2D Pin Jointed Lattice Structures.” AES Technical Reviews, Part B: International Journal of Advances in Mechanics and Applications of Industrial Materials 1.1 (2009): 83-91. |
| [10] | Elsayed, Mostafa SA, Hébert Clément, and Damiano Pasini. “Structural analysis of pin jointed lattice structures.” 3rd international conference on advances and trends in engineering materials and their applications, AES-ATEMA. 2009. |
| 2008 and before | |
| [9] | MSA ElSayed and Damiano Pasini “Multi-Scale Model of the Effective Properties of the Octet-Truss Lattice Material”, AIAA Technical Conferences, Victoria, BC, Canada, September 10-12, 2008. |
| [8] | MSA ElSayed, Ramin Sedaghati and Mohammed Abdo “New Approach for Generating Beam Models of Complex aircraft wing-box Structures Used for Static Aero-elasticity”, The Canadian Aeronautics and Space Institute Conference- CASI 2007 (Aero 07). April 2007. |
| [7] | Elsayed, Mostafa SA, et al. “WING–BOX STRUCTURAL DESIGN OPTIMIZATION.” Rept. 8 (2007). |
| [6] | Abd-Elwahab, Mostafa, and Hany A. Sherif. “Pre-tensioned layer damping as a new approach for vibration control of elastic beams.” Journal of vibration and acoustics 128.3 (2006): 338-346. |
| [5] | Elsayed, Mostafa SA, et al. “WING–BOX STRUCTURAL DESIGN OPTIMIZATION.” Rept 7 (2006). |
| [4] | Elsayed, Mostafa SA, Amandeep Sing, and Ramin Sedaghati. “3D Finite Element Model of DLR-F6 Aircraft Wing-Box Structure, Created in PATRAN and Analyzed in NASTRAN.” MOSAIC Project, Rept 6. 2006 |
| [3] | MSA ElSayed, H.A. Sherif and A.A. Omer, “New Approach for Vibration Control of a Cantilevered Beam”, 10th International Conference On Aerospace Sciences And Aviation Technology, Technical College, Cairo Egypt, pp. 527-537, 13-15 May, 2003. |
| [2] | MSA ElSayed and H.A. Sherif “Smart Control of Base Excited Cantilevered Beam Using Active Constrained Layer Damping”, 10th International Conference On Applied Mechanics And Mechanical Engineering, Technical College, Cairo Egypt, pp. 154-160, 14-16 May, 2002. |
| [1] | MSA ElSayed, “Active and Passive Control of Mechanical Vibration of Cantilever Beam”, Master of Applied Science Thesis, Department of Mechanical Engineering, Military Technical College, Cairo, Egypt, (2001). |
