Abstract:
Semirigid pavements are gaining importance in the pavement design field due to their improved performance in freezing zones. These semirigid pavements are constructed similarly to asphalt pavements, but with a cement-stabilized base layer. However, there is a limited study that quantifies the influence of design factors on the performance of semirigid pavements. Therefore, an attempt was made to investigate the role of subgrade, temperature, moisture, traffic, crack joint spacing, speed, asphalt thickness, cement-treated base (CTB) layer thickness, elastic modulus, and modulus of rupture of CTB layer on semirigid pavement design. Different combinations of factors were formulated using fractional factorial design in the design of the experiment (DoE). All factors influencing the design of semirigid pavements were considered on two levels (low and high). This analysis used data from the Federal Highway Administration’s (FHWA’s) Long-Term Pavement Performance Program (LTPP). These data were incorporated into the AASHTOWare Pavement ME Design 2.6.1 (MEPDG) software. Design-Expert was used to determine the significance of various factors on the performance indexes. In addition, an optimization technique was used to determine the optimal design thickness for cement-treated base under various subgrade and climatic conditions. The result suggests that the thickness of a CTB layer is greater on fine-grained soil than on coarse-grained soil.
Authors: Khan S, Hossain K, Bazan C, Swarna S.
Link(s) for the Paper: Journal Website | ResearchGate