PodMic Kit
This kit includes:
- Rode PodMic dynamic microphone
- Rode WS14 pop screen
- Rode DS-2 mic stand
- Focusrite Scarlett 2i2 audio interface
- XLR microphone cable
- USB-C to USB-C cable
Setting up:
- Adjust the stand to bring the mic to mouth level.
NOTE: Always hold the microphone during adjustments to prevent damage.
NOTE: The mic should positioned over the base of the stand, never the other way. - Connect the XLR cable to Input 1 on the audio interface.
NOTE: This is a dynamic microphone. Leave the 48v button turned off. - Connect the audio interface to your laptop with the USB-C cable.
- Connect headphones to the headphone output jack on the right side of the interface.
- In your software, choose ‘Focusrite Scarlet 2i2’ as your audio input and output.
In Use:
- Set the Input 1 ‘Gain’ knob to about 90%.
- Turn on the ‘Direct Monitor’ button (one green circle).
- Ignore the other knobs and buttons.
- Use the small knob about the headphone jack to adjust the volume.
- Speak at a good volume, keeping your mouth close to the microphone